Determination of different parameters of Two Port Network and Verification of their Interrelations

Procedure:

Enter the supply voltage and frequency.
Enter the parameters of M and N network and switch on the supply.
M and N networks can be used as separately or in cascade. Select the desired network by choosing the corresponding tab.
Under "Controls" Choose the network parameters (Z / Y / h / ABCD) that needs to be determined in "Parameter Select".
In "Port Select" choose "Input port" for input port supply connected with output port open and "Output port" for output port supply connected with input port open.
Click on "Simulate" to observe the Voltmeter and Ammeter readings for the for the selected arrangement and the corresponding network parameters.

Tutorials Point

Vin
(in Volt)

Frequency (in Hz)

M Network
Determination of 2-port network parameters for M Network:

Input Port - Supply Connected, Output Port - Open

Z₁₁ = Z₂₁ = Y₁₁ = Y₂₁ =
h₁₁ = h₂₁ =     A =      C =

Output Port - Supply Connected, Input Port - Open

Z₁₂ = Z₂₂ = Y₁₂ = Y₂₂ =
h₁₂ = h₂₂ =     B =      D =

Controls
Parameter Select:
Port Select:
N Network
Determination of 2-port network parameters for N Network:

Input Port - Supply Connected, Output Port - Open

Z₁₁ = Z₂₁ = Y₁₁ = Y₂₁ =
h₁₁ = h₂₁ =     B =      D =

Output Port - Supply Connected, Input Port - Open

Z₁₂ = Z₂₂ = Y₁₂ = Y₂₂ =
h₁₂ = h₂₂ =     A =      C =

Controls
Parameter Select:
Port Select:
MN Network
Determination of 2-port network parameters for MN Network:

Input Port - Supply Connected, Output Port - Open

Z₁₁ = Z₂₁ = Y₁₁ = Y₂₁ =
h₁₁ = h₂₁ =     B =      D =

Output Port - Supply Connected, Input Port - Open

Z₁₂ = Z₂₂ = Y₁₂ = Y₂₂ =
h₁₂ = h₂₂ =     A =      C =

Controls
Parameter Select:
Port Select: